Siemens Simatic CFU Commissioning Manual page 70

Commissioning
8.7 Commissioning (offline)
Specifying names for freely configurable channels
1. In HW Config, select the "DIQ..." slot in the index list.
2. In the shortcut menu select Edit symbols... .
The "Edit symbols - DIQ8..." dialog box is opened.
3. Adapt the signal names manually or assign the names automatically by using the
"Supplement symbols" function.
Note: Even if all symbols are assigned, you can use an IO channel only once as an input
or output.
Additional information
You can find additional information on assigning parameters in section "Configuring freely
configurable channels (parameter overview - DIQ) (Page 78)".
70
Commissioning Manual, 07/2018, A5E39252870-AC
SIMATIC CFU