Atex Approval; Iecex Approval; Inmetro Approval - Siemens Simatic CFU Commissioning Manual

12.1.1.2

ATEX Approval

Tests were carried out according to the following standards for the ATEX approval:
● EN 60079-0
● EN 60079-7
● EN 60079-11
● EN 60079-15
● EN 60079-31
Certificate: DEKRA 17ATEX0047 X
Personal injury and material damage can be incurred.
In potentially explosive atmospheres, personal injury and material damage can be incurred
if plug connections are disconnected during operation.
Read section "Use in hazardous areas (Page 24)".
12.1.1.3

IECEx approval

Tests were carried out according to the following standards for the IECEx approval:
● IEC 60079-0
● IEC 60079-7
● IEC 60079-11
● IEC 60079-15
● IEC 60079-31
Certificate: IECEx DEK 17.0025X
Personal injury and material damage can be incurred.
In potentially explosive atmospheres, personal injury and material damage can be incurred
if plug connections are disconnected during operation.
Read section "Use in hazardous areas (Page 24)".
12.1.1.4

INMETRO approval

The components described satisfy the requirements of the following standards:
● ABNT NBR IEC 60079-0
● ABNT NBR IEC 60079-7
● ABNT NBR IEC 60079-11
SIMATIC CFU
Commissioning Manual, 07/2018, A5E39252870-AC
WARNING
WARNING
Technical specifications
12.1 General technical specifications
129