Siemens Simatic CFU Commissioning Manual page 76

Commissioning
8.7 Commissioning (offline)
Object in HW Tab
1)
Config
Slot FB<n> General
(only for CFU
Addresses
PA)
(configuration
Parameter
places for field
devices on
PROFIBUS PA
)
2
You can find additional information on the tabs in the STEP 7 online help.
1)
For information only / no modification of the function possible, you can only enter comments.
2)
76
Explanations
Name for the respective field device
I/O addresses and diagnostic addresses for the
field device
Are set via SIMATIC PDM.
Supplementary information
Commissioning Manual, 07/2018, A5E39252870-AC
SIMATIC CFU