Built-In Alarm Settings - Panasonic BL-C210 Series Operating Instructions Manual

7.8 Built-in Alarm Settings

7.8 Built-in Alarm Settings
The camera's built-in alarm can sound when the built-in sensor, external sensor, or motion detection is
triggered. You can set when the built-in alarm sounds, as well as the built-in alarm volume and the built-in
alarm sound type. After saving these settings, confirm the built-in alarm volume and sound type by clicking
[Sound Alarm] on the single camera page.
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Advanced], click [Built-in Alarm].
3.
Under [Trigger for Built-in Alarm], select when the built-in alarm sounds.
–
[Button or sensor]: The built-in alarm sounds when [Sound Alarm] is clicked on the single camera page
and when the built-in sensor, external sensor, or motion detection is triggered.
–
[Button only]: The built-in alarm sounds only when [Sound Alarm] is clicked on the single camera page.
–
[Sensor only]: The built-in alarm sounds only when the built-in sensor, external sensor, or motion
detection is triggered, and the [Built-in Alarm] button is not displayed in the operation bar.
–
[Off]: The built-in alarm does not sound, and the [Built-in Alarm] button is not displayed in the operation
bar.
4.
Under [Built-in Alarm Volume], select the volume of the built-in alarm.
5.
Under [Built-in Alarm Sound Type], select the built-in alarm sound type.
6.
Click [Save].
Note
•
The built-in alarm does not sound when the sound detection feature is triggered (see Page 54).
174 Operating Instructions