Panasonic BL-C210 Series Operating Instructions Manual page 106

4.2.1 Configuring the Camera to Use Viewnetcam.com
2.
Under [Viewnetcam.com Registration], select [Register with Viewnetcam.com].
3.
Click [Save].
4.
When [Setup completed] is displayed, click [Go to Viewnetcam.com Registration page].
•
The Viewnetcam.com website is displayed. Follow the on-screen instructions to register with
Viewnetcam.com.
•
When [Setup completed] is displayed, the addresses for accessing the camera over the LAN and over
the Internet are displayed.
5.
Click [To Single Camera page].
Configuring the camera to use Viewnetcam.com from the [DynamicDNS]
page
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Basic], click [DynamicDNS].
3.
Select [Viewnetcam.com], then click [Next].
4.
Click [Save].
•
When setup is complete, [Success!] is displayed.
106 Operating Instructions