Using The Operation Bar - Panasonic BL-C210 Series Operating Instructions Manual

1.2.1 Using the Operation Bar

1.2.1 Using the Operation Bar
The operation bar is displayed to the left of the camera image when viewing images from a single camera, and
provides the following features.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
24 Operating Instructions
A. End Display and Preset Display: When the lens has reached the end
of its pan or tilt range, the appropriate message will be displayed here
([Left End], [Right End], [Up End], [Down End]. [Additionally, when a
preset (see Page 29) is selected, the name of the preset is displayed
here (except [Home Position]).
B. Pan and Tilt Scan Buttons: Allow you to pan or tilt the lens to its
maximum pan or tilt range (see 1.2.2 Aiming the Camera Lens). The lens
returns to the original position when finished.
C. Navigation Buttons: Allow you to pan the lens left and right, and tilt the
lens up and down (see 1.2.2 Aiming the Camera Lens). Click the center
navigation button to move the lens to the home position.
D. Precise Pan and Tilt On/Off Buttons: Turn the precise pan/tilt feature
on and off. When this feature is turned on, the navigation buttons move
the camera in small increments, allowing precise lens control (see
1.2.2 Aiming the Camera Lens).
E. Pan/Tilt Range Button: Allows you to limit the pan and tilt range of the
camera's lens (see Page 28).
F. Preset Program Button: Allows you to add, change, or delete presets
(see Page 29).
G. Preset Selection Buttons and Menu: Allow you to move the lens to a
pre-programmed position. You can register up to 8 presets (see
Page 29). Click buttons 1–8 to move the lens to the corresponding
preset, or select the desired preset from the pull-down menu.
H. Brightness Controls: Allow you to change the brightness of the
displayed image. Click [-] to darken the image, [+] to brighten the image,
and [STD] to return the image to the standard brightness level. There are
a total of 9 brightness levels available.
I. Backlight Correction Buttons: Allow you to turn the backlight correction
feature on and off. This feature can automatically correct the contrast in
dark areas of the camera image (see page 31).
J. White Balance Selector: Allows you to adjust the white balance to match
the environment of the camera. Change this setting to achieve the most
natural looking colors (see Page 32).
K. Built-in Alarm Button: Allows you to sound the built-in alarm. You can
set when the built-in alarm sounds, as well as the built-in alarm volume
and the built-in alarm sound type (see Page 174). This button is not
available depending on the [Trigger for Built-in Alarm] setting (see
Page 174).
L. Output Control (BL-C230 Only): Controls the output signals of the
external I/O interface (see Page 168).