Panasonic BL-C210 Series Operating Instructions Manual page 107

5.
Click [Go to Viewnetcam.com page].
6.
Click [Your Account Link].
7.
The Viewnetcam.com website is displayed. Follow the on-screen instructions to register with
Viewnetcam.com.
•
If the Viewnetcam.com website is not displayed, confirm that your PC can access the Internet, then
click your web browser's refresh button.
•
When registration is complete, you can access the camera using the Viewnetcam.com URL you
selected during registration. Note that you can access the camera using this URL only from a PC that
is not connected to the same network (LAN) as the camera.
Note
•
If you have already registered with Viewnetcam.com, your personalized URL is displayed. This is the
address you can use to access the camera over the Internet. You can also access the URL displayed
next to [Your Account Link] to view your Viewnetcam.com registration information.
•
If [Your Account Link] is not displayed, confirm that you have registered with Viewnetcam.com and that
your PC can access the Internet, then click your web browser's refresh button.
•
Typically [Global IP Address Notification Method] should be set to [Normal]. If you cannot access the
camera using the registered URL 30 minutes after registering with Viewnetcam.com, select
[Advanced]. In this case, UPnP must be enabled for the camera and for the router.
•
If the global IP address of the router changes frequently, the camera may not be able to be accessed
over the Internet. In this case, set the [Updating time] setting to a lower (shorter) value.
Confirming your Viewnetcam.com registration
You can confirm that the camera has been successfully registered to Viewnetcam.com.
1.
Click the [Maintenance] tab.
2.
On the left side of the screen under [Maintenance], click [Status].
3.
Under [Viewnetcam.com], confirm that [Enabled (2)] is displayed.
Note
•
If the status is displayed as [Expiration], confirm that you have registered with Viewnetcam.com, or
restart the camera and access this page again.
4.2.1 Configuring the Camera to Use Viewnetcam.com
Operating Instructions 107