4.
Under [Input User Name and Password], enter the user name and password, then re-enter the password
for verification.
•
See Page 206 for a list of valid characters. Note that [Space], ["], ['], [&], [<], [>], and [:] cannot be
entered.
5.
Set the following parameters as desired.
a.
Under [Access Level], select the desired setting for [Video Display Time].
–
[Unlimited]: The user can view video images ([H.264], [MPEG-4], or [MJPEG]) from the camera
without restriction.
–
[Not permitted]: The user can view only still images.
–
[10 s]–[60 min]: The user can view video images for the selected amount of time, after which the
user can view only still images.
6.3 General Users
Operating Instructions
153