Viewing Buffered Images - Panasonic BL-C210 Series Operating Instructions Manual

2.6 Viewing Buffered Images

If you have configured the camera to buffer images (see Page 51 or Page 54), you can access the camera
and view the buffered images.
Note
•
If you have configured the camera to transfer images by FTP, E-mail, or HTTP, images are deleted
once they have been successfully transferred and you cannot view the images using the procedure
described in this section.
•
When buffering MPEG-4 videos, the videos cannot be viewed until buffering has ended. Buffering ends
when the memory is full (up to 1 minute when buffering images to the internal memory).
•
Buffering ends when the buffered file size reaches 20 MB. When the 20 MB limit is reached, a new file
is created. Note that it may take 20 minutes or more for a 20 MB file to be buffered.
1.
Click the [Buffered Image] tab.
•
The oldest buffered image for triggers 1–5 are displayed.
•
If an image was buffered in MPEG-4 format, a black screen is displayed.
•
If a trigger is disabled, or if the trigger has not yet buffered images, a gray screen is displayed.
•
Date and time overlays, status overlays, and text overlays may be displayed on buffered images
according to the [Overlay Setting] (see Page 159). See Page 11 for an example of a camera image
overlays.
1. Timer
4.Sound Detection
2.
Click the trigger title corresponding to buffered images you want to view.
2.6 Viewing Buffered Images
2. Sensor
5. Alarm1
Operating Instructions
3. Motion Detection
73