Setting The Date And Time - Panasonic BL-C210 Series Operating Instructions Manual

5.5 Setting the Date and Time

5.5 Setting the Date and Time
Set the camera's date and time settings to ensure image buffering, image transferring, camera operation time,
and time stamp features function as expected.
Note
•
All images buffered in the internal memory are deleted when you click [Save] at the end of this
procedure.
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Basic], click [Date and Time].
3.
Set the following parameters as desired.
a.
Under [Time Setting], select the current month, day, and year.
b.
Select whether you want to use 12-hour or 24-hour time format.
c.
Select the current time.
d.
Under [Automatic Time Adjustment], select whether you want to enable automatic date and time
adjustment.
i.
If you select to enable this feature, enter the IP address or host name of the desired NTP (network
time protocol) server
•
An IPv6 address can be specified; note that the IPv6 address must be enclosed in brackets.
ii.
Select your time zone.
e.
Under [Adjust Clock for Daylight Saving Time/Summer Time], select whether you want the camera to
automatically adjust its date and time for Daylight Saving Time/Summer Time.
140 Operating Instructions
(max. 255 characters) that the camera will use to adjust its date and time.
*1