Registering Multiple Cameras - Panasonic BL-C210 Series Operating Instructions Manual

7.2 Registering Multiple Cameras

You can register other Panasonic Network Cameras to this camera's [Multi] tab. This allows you to view images
from up to 16 cameras by simply accessing this camera and clicking the [Multi] tab.
Registering other cameras to this camera
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Advanced], click [Multi-Camera].
3.
Click [Add].
4.
Under [Add Camera], check [Display].
5.
Check [HTTPS] if the corresponding camera is configured to use HTTPS.
•
If this setting does not match the camera's setting, the camera cannot be accessed from the [Multi]
page.
6.
Enter the IP address or host name of the other camera.
•
An IPv6 address can be specified; note that the IPv6 address must be enclosed in brackets.
•
To allow users to view cameras over the Internet, enter the camera's global IP address or host name
here (i.e., the IP address or host name needed to access the other camera over the Internet).
•
To allow users to view cameras over the LAN, enter the local IP address of the other camera here (i.e.,
the IP address needed to access the other camera over the LAN).
•
See Page 206 for a list of valid characters. Note that [Space], ["], ['], [&], [<], [>], [#], [%], [=], [+], and
[?] cannot be entered.
•
You can register this camera to the multi camera page by simply clicking [Clicking this link, enters this
camera's settings.].
7.
Enter the port number of the other camera.
7.2 Registering Multiple Cameras
Operating Instructions 163