6.4 Guest Users
4.
Under [User ID List], select [Guest User], then click [Modify].
5.
Set the following parameters as desired.
a.
Under [Access Level], select the desired setting for [Video Display Time].
–
[Unlimited]: The user can view video images ([H.264], [MPEG-4], or [MJPEG]) from the camera
without restriction.
–
[Not permitted]: The user can view only still images.
–
[10 s]–[60 min]: The user can view video images for the selected amount of time, after which the
user can view only still images.
b.
Select the desired setting for [Refresh Rate]. Still images viewed by the user will be refreshed at this
rate.
c.
Select the features the user is allowed to use.
156
Operating Instructions