5.1.2 Proxy Server Settings
5.1.2 Proxy Server Settings
The following settings are necessary if your network uses a proxy server and you want to transfer images by
HTTP or send trigger notifications by HTTP. If you do not use a proxy server, these settings are unnecessary.
Note
•
Consult your Internet Service Provider (ISP) or network administrator to find out if your network uses
a proxy server.
•
The camera does not use encryption when sending the login ID and password to access the proxy
server. Use caution as necessary to prevent disclosure of this information.
•
For added security, we recommend periodically changing the login ID and password that are required
to access your proxy server.
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Basic], click [Network (IPv4)].
3.
Under [Proxy Server Settings], enter the address
access the proxy server.
•
Ask your ISP or network administrator for the correct settings.
•
An IPv6 address can be specified; note that the IPv6 address must be enclosed in brackets.
4.
Click [Save].
*1
[Space], ["], ['], [&], [<], and [>] cannot be used.
*2
["] cannot be used.
118
Operating Instructions
port no., login ID
and password
*1
*2
that are required to
*2