1.2.6 Backlight Correction
The camera's backlight correction feature can automatically correct the contrast in dark areas of the camera
image. This means even when there is backlight or a large amount of contrast in the image, the camera can
correct the image to provide a more consistent, natural image. You can turn this feature on and off by clicking
[On] and [Off] under [Backlight] in the operation bar.
Note
•
If you select to display the status in the overlay setting,
camera pages when the backlight correction feature is on (see Page 159).
•
The backlight setting assigned to the home position is used each time the camera is turned on.
•
The current backlight setting is saved when registering a preset (Page 29), and is used when viewing
the preset.
•
The effectiveness of this feature may vary depending on the object being viewed and other conditions.
Additionally, under certain conditions, the image may appear unnatural, or noise may appear in the
image when this feature is enabled.
1.2.6 Backlight Correction
is displayed on the single camera and multi
Operating Instructions
31