Panasonic BL-C210 Series Operating Instructions Manual page 114

5.1.1 Network (IPv4) Settings
[Static]
1.
Set the following parameters as desired.
a.
Under [Network Configuration from Setup Program], select whether or not you want to allow the camera
to be configured using the Setup Program on the CD-ROM.
b.
Under [Internet Connection], enter the port number to be assigned to the camera.
•
The default port number is 80, however, note that some ISPs do not allow access from the Internet
using port 80. Ask your ISP or network administrator about which port numbers are available for
access over the Internet.
•
Do not use the following port numbers:
–
20 and 21: used for FTP
–
23: used for Telnet
–
25: used for SMTP
–
53: used for DNS
–
110: used for POP3
–
443: used for HTTPS
–
4000: used for ICQ
–
6661–6667: used for IRC
•
If you are connecting multiple cameras and plan on using port forwarding to allow Internet access
to the cameras, assign a different port number to each camera. We recommend using port numbers
in the 50000–50050 range.
c.
Enter the IP address to be assigned to the camera.
114 Operating Instructions