Registering And Changing Presets - Panasonic BL-C210 Series Operating Instructions Manual

Indoor use only, wireless/wired type
Hide thumbs Also See for BL-C210 Series:
Table of Contents

Advertisement

1.2.4 Registering and Changing Presets

Presets allow you to easily aim the camera lens in the desired direction. Brightness, backlight, and white
balance settings are also saved when registering a preset. The following presets can be registered:
Home position (the direction that the lens moves to when you turn the camera on or click the center
navigator button)
Sensor position
Alarm positions 1 and 2
Presets 1–8
Additionally, the first 4 presets are set by default.
1: UpperLeft
2: UpperRight
3: LowerLeft
4: LowerRight
Viewing a preset
You can move the lens to a preset position in the following ways:
Click the center navigator button (to move the lens to the home position)
Click [-Preset-] and select a preset from the pull-down menu
Click a blue preset button (1–8) (Unregistered preset buttons are displayed in white.)
Registering or changing a preset
Note
This feature is available to the camera administrator only.
Zoom settings are not registered to presets.
1.
Confirm that you are logged in to the camera as the administrator.
2.
Under [Preset] in the operation bar, click [Program].
3.
Aim the camera in the desired direction.
4.
Adjust the brightness, backlight, and white balance settings if desired. These settings will be registered to
the preset.
5.
Under [Preset Number], select the desired preset from the pull-down menu.
6.
Enter a name for the preset (max. 15 characters).
You cannot rename the home position, sensor position, or alarm positions.
See Page 206 for a list of valid characters. Note that [Space], ["], ['], [&], [<] and [>] cannot be used.
7.
Click [Save] to register the preset, or click [Back] to cancel.
When [Success!] is displayed, click [Back] to continue.
Deleting a preset
Note
This feature is available to the camera administrator only.
1.
Confirm that you are logged in to the camera as the administrator.
2.
Under [Preset] in the operation bar, click [Program].
3.
Under [Preset Number], select the desired preset from the pull-down menu.
You cannot delete the home position or alarm positions.
4.
Click [Delete] to delete the preset, or click [Back] to cancel.
When [Success!] is displayed, click [Back] to continue.
1.2.4 Registering and Changing Presets
Operating Instructions
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents