Panasonic BL-C210 Series Operating Instructions Manual page 204

3.
Select the desired camera, enter the camera's administrator user name and password when prompted,
then click [OK].
4.
Click [Save Settings to PC].
5.
Specify a location to save the file, then click [Save].
6.
When [Settings were saved on the PC.] is displayed, click [OK].
Note
•
Buffered images are not saved in the configuration file.
•
The configuration file's extension (.dat) must not be changed. If you change it, the saved settings cannot
be restored.
•
The configuration file is encrypted. Do not open it using a text editor or other software, otherwise it may
become corrupted. If the configuration file becomes corrupted it cannot be used to restore camera
settings.
•
If you save a configuration file and then update the camera's firmware later, the configuration file may
not be able to be restored properly. If you regularly save a configuration file of the cameras settings,
remember to save a configuration file after you update the camera's firmware.
Restoring settings from a configuration file
1.
Insert the included CD-ROM into the CD-ROM drive of your PC.
•
The Setup Program starts. If the program does not start, double-click Setup.exe found on the CD-ROM.
2.
Click [Save Settings to PC/Save Settings to Camera].
3.
Click [Save Settings to Camera]. A dialog prompts you to specify the location of the saved configuration
file.
4.
Specify the configuration file and click [Open].
5.
Select the desired camera, enter the camera's administrator user name and password when prompted,
then click [OK].
6.
Click [Execute]. A dialog displays the status.
7.
After the settings have been restored to the camera, the camera will restart automatically.
8.
Click [OK] when finished.
Note
•
Network settings and the administrator user name and password are not changed when you restore a
configuration file using the Setup Program.
204 Operating Instructions