Panasonic BL-C210 Series Operating Instructions Manual page 39

3.
Click [Save].
4.
Click your web browser's refresh button to apply the new settings.
Note
•
You can set the detection notification sound feature for each camera viewed on the multi camera page,
however, this feature is not available when [16 Screens] is selected.
•
Sample audio files can be found in the [AudioSample] folder on the CD-ROM.
Image display method
You can select the image display method used to display motion images on the single camera page and the
multi camera page. Adjust this setting if motion images are not smooth or if frames are dropped.
This feature is set independently on each computer that accesses the camera. It affects all camera images
displayed on the multi camera page and cannot be set independently for each camera.
Note
•
Using this feature may cause frame rate to decrease and may increase the CPU usage. If this occurs,
try changing the [Image Display Method] setting.
When viewing H.264 images
When viewing H.264 images, the image display method is DirectShow® and cannot be changed.
When viewing MPEG-4 images
1.
While viewing camera images, click
2.
Next to [Image Display Method], select the desired method.
•
Options available for this setting vary depending on the operating system and other software installed
on the computer.
•
When [Auto] is selected when using Windows Vista, GDI is used. When using Windows® XP,
DirectDraw® is used.
3.
Click [Save].
1.2.11 Additional Features Available While Viewing Live Camera Images
.
Operating Instructions 39