Configure The Alarm Settings [Alarm]; Configure The Settings Relating To The Alarm Action [Alarm] - Panasonic WV-SW395APJ Operating Instructions Manual

13 Configure the alarm settings [Alarm]

13 Configure the alarm settings [Alarm]
The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the
VMD area settings, and the alarm occurrence notification can be configured on this page.
The "Alarm" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab.
13.1 Configure the settings relating to the alarm
action [Alarm]
Click the [Alarm] tab on the "Alarm" page. (®page 47, page 49)
The settings relating to the alarm can be configured in this section. Refer to page 138 and page 141 for further
information about the settings relating to the alarm images and the alarm output terminal.
Alarm
[Terminal 1]
Determine how to use terminal 1.
•
Off: Not used.
•
Alarm input: Receives alarms.
–
Close
SW175 SW175
is changed to "On".
–
Open
SW175 SW175
is changed to "Off".
•
Black & white input: Receives the black & white switchover input. (When the input is set to On, the black
& white mode is activated.)
•
Default: Off
[Terminal 2]
Determine how to use terminal 2.
•
Off: Not used.
•
Alarm input: Receives alarms.
–
Close
SW175 SW175
is changed to "On".
134 Operating Instructions
SW174W SW174W SW172 SW172 ST165 ST165
SW174W SW174W SW172 SW172 ST165 ST165
SW396 SW396 SW395 SW395
SW174W SW174W SW172 SW172 ST165 ST165
: An alarm is detected when the terminal status
ST162 ST162
: An alarm is detected when the terminal status
ST162 ST162
SC386 SC386 SC385 SC385
: An alarm is detected when the terminal status
ST162 ST162