Check Lists; General Check List - Mitsubishi MELSEC-A A1SD71-S2 User Manual

7. CHECK LISTS
.
. .
MELSEC-A
7. CHECK LISTS
The check lists given in associated equipment manuals should also be re-
ferred to. For the AISCPU, refer to the AISCPU User's Manual.
7.1
General Check
List
Before testing the AlSD71, check the following:
Table 7.1 General Check List
Check Point Check
Description
1
Parameter setting
2
Battery
Check that battery leads are connected to the
Check that parameters have been set.
Check that values are correct.
Check that zero return data has been set.
Check that values are correct.
Check that positioning data has been set.
Check that values are correct.
printed circuit board.
3
Zero return data setting
4
Positioning data
POINT
If only one axis (X
or
Y axis) is used, parameters and zero return data
must be written to the unused axis. Otherwise zero return will result in
error and switch on the X1B (error detection) signal.
(Data written must be within the range given in the User's Manual.
Parameters may be default values.)
7 - 1