Modem Status Frame - 0X8A - Digi XBee3 DigiMesh 2.4 User Manual

Frame descriptions

Modem Status frame - 0x8A

Description
Devices send the status messages in this frame in response to specific conditions.
Format
The following table provides the contents of the frame. For details on frame structure, see
format.
Frame data
fields
Frame type
Status
Example
When a device powers up, it returns the following API frame.
Frame data fields
Start delimiter
Length
LSB 2
Frame type
Status
Checksum
Digi XBee3® DigiMesh 2.4 RF Module User Guide
Offset Description
3 0x8A
0x00 = Hardware reset
4
0x01 = Watchdog timer reset
0x02 = End device successfully associated with a coordinator
0x03 = End device disassociated from coordinator or coordinator failed to
form a new network
0x06 = End device successfully associated with a coordinator
0x0B = Network woke up
0x0C = Network went to sleep
0x0D Input voltage is too high
Modem Status frame - 0x8A
Offset Example
0 0x7E
MSB 1 0x00
LSB 2 0x02
3 0x8A
4 0x00
5 0x75
API frame
183