c17 rstt
(reset target)
Operation
Outputs the reset signal to the reset input pin on the target board.
Format
c17 rstt
Usage example
(gdb) c17 rstt
TARGET resetting ................... done
The target is reset.
Message when target resetting fails:
TARGET resetting ................... failure
Notes
The c17 rstt command can only be used in ICD Mini mode.
To execute this command, a reset input pin is required on the target board.
S5U1C17001C Manual
(Rev. 1.0)
Seiko Epson Corporation
8 Debugger
[ICD Mini]
8-28