3. Name and Function of Each Part
3. Name and Function of Each Part
This chapter shows the name and function of each part in the ICDmini Ver. 3.0.
3.1 Right Side Panel (Target System Interface Connector)
This connector is used to connect a target system. For more information, refer to Chapter 4.
Figure 3.1.1 ICDmini Ver. 3.0 Right Side View
3.2 Left Side Panel (USB Connector)
This connector is used to connect the host computer using a USB cable. The ICDmini Ver. 3.0 should be
connected directly to the USB port of the host computer.
Figure 3.2.1 ICDmini Ver. 3.0 Left Side View
4
ICDmini Ver. 3.0 User Manual
Seiko Epson Corporation
(Rev 1.0)