Table of Contents
Advertisement
3)
Select [Insert dot matrix] from the [Edit] menu.
If no LCD driver is set, the [LCD Driver] dialog box appears.
From the list, select the model for development, then click the [OK] button.
*
The [LCD Driver] dialog box appears only when no LCD driver has been set.
When an already produced LCD file is read or when the [Start LcdUtility] button of the IDE is clicked while a project is
selected by the IDE, an LCD driver is already set and this dialog box does not appear.
Note: Once set, an LCD driver cannot be changed. Be extremely careful when setting the LCD driver.
4)
The [Dot matrix] dialog box appears.
S5U1C17001C Manual
(Rev. 1.0)
Seiko Epson Corporation
10 Other Tools
10-22
Advertisement
Table of Contents
