Table of Contents
Advertisement
Make the following settings in the [Dot matrix] dialog box.
Position
Specify the coordinates of the upper left corner of the dot matrix. (X and Y in the diagram)
Number of dots
Specify the number of dots along the horizontal and vertical axes of the dot matrix. (C and R in the diagram)
Dot size
Specify the size of each dot in the dot matrix by entering the number of dots. (W and H in the diagram)
Pitch size
Specify the interval between dots in the dot matrix by entering the number of dots. (h and v in the diagram)
Driver
Indicates the name of the currently set LCD driver. This cannot be changed.
The maximum COM/SEG value is set by the LCD driver.
COM/SEG
Select the COM/SEG port allocating direction. Port numbers will be allocated in sequence based on the COM/SEG values
specified in the [Start] text box.
Click the [Preview] button after making the settings above. A dot matrix will be displayed in the panel editing window for
confirmation. Click the [OK] button to produce a dot matrix based on the settings entered.
S5U1C17001C Manual
(Rev. 1.0)
Panel width
Figure 10.8.6.1.1
Dot matrix setting
Seiko Epson Corporation
10 Other Tools
10-23
Advertisement
Table of Contents
