Table of Contents
Advertisement
7.6 Linker Script Generation Wizard
This IDE features a linker script generation wizard that creates linker script files.
7.6.1
Output File
Linker script file
File format:
Text file
File name:
< filename >.x
Description:
This file specifies the start of each section and other linkage information.
The default file name is the name of the project. Assign a new name, if you wish.
The generated linker script file can be selected in the [GNU17 Setting] page in the [Properties] dialog box of the
project.
7.6.2
Starting and Terminating the Linker Script Generation Wizard
Starting up the linker script generation wizard
Launch the linker script generation wizard by one of the following methods:
(1)
Select [GNU17 Linker Script] from the [New] shortcut in the toolbar.
(2)
Select [New] > [GNU17 Linker Script] from the [File] menu.
(3)
Select [New] > [Project...] > [C/C++] > [GNU17 Linker Script] from the [File] menu.
(4)
Select and right-click on the project, then select [New] > [Project...] > [C/C++] > [GNU17 Linker Script].
Terminating the linker script generation wizard
Close the linker script generation wizard by one of the following methods:
(1)
Click the [Finish] button. In this case, a linker script file will be created.
(2)
Click the [Cancel] button. In this case, no linker script file will be generated.
S5U1C17001C Manual
(Rev. 1.0)
Seiko Epson Corporation
7 Linker
7-12
Advertisement
Table of Contents
