c17 flvs
(flash programming power setting cancellation)
Operation
Stops the flash programming power supply set by the c17 flv command. This command executes after the load command.
Execute this command after c17 flv executes.
Format
c17 flvs (cancellation)
Usage example
(gdb) target icd icdmini3
(gdb) c17 flv 7.5
(gdb) load
(gdb) c17 flvs
The supply of 7.5 V flash programming power starts before the load command. The supply of flash programming power stops after
the load command is executed.
Notes
The model-specific information file for microcomputers equipped with a flash programming power terminal is required to use
this command.
This command cannot be used in simulator mode.
S5U1C17001C Manual
(Rev. 1.0)
Seiko Epson Corporation
8 Debugger
[ICD Mini]
8-65