Table of Contents
Advertisement
■Example 4
(gdb) c17 help c17 rst
c17 rst: Reset
usage: c17 rst
example:
(gdb)c17 rst
The CPU is reset.
To display a C17 command, specify the command name including "c17".
Notes
•
Executing the help command (that comes standard with gnu) instead of the c17 help command displays help for the
command classes and commands set in the gnu debuggers. This debugger does not support all of these command classes or
commands. Note that device operation cannot be guaranteed for commands not described in this manual.
A mode list (e.g. [ICD/SIM]) appears in the usage display (see Examples 3 and 4) indicating the modes in which the
command is effective.
ICD:
The command can be used in ICD Mini mode (when the ICDmini is used)
SIM:
The command can be used in simulator mode (when debugging with the PC alone)
If "[ICD]" is displayed, it indicates that the command cannot be executed in modes other than ICD Mini mode.
S5U1C17001C Manual
(Rev. 1.0)
Seiko Epson Corporation
[ICD/SIM]
8 Debugger
8-60
Advertisement
Table of Contents
