Denso GT20Q-SB User Manual page 136

Example
S,ANL
• Readable code:
• Readable number of digits: Default
S,INM,,NM,,I10N5,I20N12
• Readable code:
• Readable number of digits: Interleaved 2 of 5 (10 to 20 digits), Codabar (5 to 12 digits), Code39 (default)
S,INM,,,,N5M8,I20N5
• Readable code:
• Readable number of digits: Interleaved 2 of 5 (4-20 digits), Codabar (NW-7) (5 digits), Code 39 (8-99 digits)
■
Format of the command option field of the command D
D ,
minimum versions
Each option must delimit by a comma.
A comma is required even if an option is not set. A comma is omissible if rest of the sub sequential options is not required
to set.
Example
D
, , ,
Not omissible (Note 1)
Note 1: If the option fields are not set, code scanning instructed by the command will be disabled. Up to six commas can be
used.
Note 2: Configuration will not be changed if "D," is set.
Note 3: Insert two commas ",," in places between,
•"San code" and "Code type" fields.
•"Code type" and "minimum version" field
UPC-A, UPC-E, EAN-8, EAN-13, Codabar (without check digit), Code 93
Interleaved 2 of 5 (without check digit), Codabar (NW-7) (Check digitdisabled), Code 39
(Check digit enabled)
Interleaved 2 of 5 (Check digit disabled), Codabar (Check digit disabled), Code39 (Check
digit disabled)
Scan dodes
Code types
Code types
, ,
, maximum versions
, , ,
Omissible
123
, ,