Data String Extraction Mode - Denso GT20Q-SB User Manual

7.2.1.1 Data String Extraction Mode

The scanner extracts the portion of data specified by the "extraction start position" and "extraction end position" from the
code specified in the parameter "code type" and outputs it in the specified data transmission format (refer to
parameters, extraction start position, and extraction end position values are as follows.

Parameters
When "Transmit data regardless of the results" is enabled, the scanned data will be output without editing if data string
extraction fails or a non-specified code is scanned.
Parameters
Code type
Transmit data regardless of the
results
Value
Any code
QR Code
iQR Code
PDF417
Data Matrix
MaxiCode
Aztec
UPC-A/EAN-13
UPC-E
EAN-8
Code 128
GS1-128
Codabar (NW-7)
Code 39
Code 93
Interleaved 2 of 5 (ITF)
Standard 2 of 5 (STF)
GS1 DataBar
GS1 Composite
Enabled/Disabled
23
Section 9.4). The