Data Block Extraction - Denso GT20Q-SB User Manual

7.2.1.2 Data Block Extraction

If the scanned data is CSV formatted data separated by commas, the scanner extracts data blocks specified by the "extraction
block number" from codes specified in the parameter code type and outputs these data blocks in the data transmission format
(refer to Section 9.4) selected in the scanner.

Parameters
When "Transmit data regardless of the results" is enabled, the scanned data will be output without editing if data block
extraction fails or a non-specified code is scanned.

Extraction block number
The extraction block number can be set to a figure between 1 and 99 and up to three blocks of data can be extracted.
Parameters
Code type
Transmit data regardless of the
results
Value
Any code
QR Code
iQR Code
PDF417
Data Matrix
MaxiCode
Aztec
UPC-A/EAN-13
UPC-E
EAN-8
Code 128
GS1-128
Codabar (NW-7)
Code 39
Code 93
Interleaved 2 of 5 (ITF)
Standard 2 of 5 (STF)
GS1 DataBar
GS1 Composite
Enabled/Disabled
25