Denso GT20Q-SB User Manual page 105

Code 93
Settings
Code 93 scanning
Code 93 minimum scannable digits
Code 93 maximum scannable digits
Note 1: The parameter setting range and the number of scannable digits differ.
GS1 DataBar, GS1 Composite
Settings
GS1 DataBar Omnidirectional, GS1
DataBar Truncated scanning
GS1 DataBar Stacked, GS1 DataBar
Stacked Omnidirectional scanning
GS1 DataBar Limited scanning
GS1 DataBar Expanded scanning
GS1 DataBar Expanded Stacked
scanning
GS1 DataBar Expanded minimum
scannable digits
GS1 DataBar Expanded maximum
scannable digits
Transmission of FNC1 for GS1
DataBar Expanded code
GS1 Composite scanning
GS1 DataBar Composite (with CC-A)
scanning
Note 2: GS1 DataBar Codes are simultaneously enabled/disabled with the QR coded parameter menu. Configuration
software can be enabled or disabled individually.
Note 3: GS1 Composite codes are simultaneously enabled/disabled with the QR-coded parameter menu. Configuration
software can be enabled or disabled individually.
Note 4: Scannable only if the space for five modules is included in the right guard bar.
GS1 Databar Limited
(ISO/IEC 24724:2006) mode
(01)00234567890129
Parameters
Enabled
Disabled
1-99 digits (excl. start-stop code and
2-digit check digit)
Parameters
Enabled
Disabled
Enabled
Disabled
Enabled (ISO/IEC24724:2006)
Enabled (ISO/IEC24724:2011)
(Note 4)
Disabled
Enabled
Disabled
Enabled
Disabled
1-99 digits
Transfer disabled
Convert to GS and transmit
User selection
Enabled
Disabled
Enabled
Disabled
Guard bar
92
Default

1 digit
99 digits
: Only available via configuration software.
Default





1 digit
99 digits



GS1 Databar Limited
(ISO/IEC 24724:2011) model
(01)00234567890129
Refer to
(Note 1)
Refer to
(Note 2)
Section 9.4 (7)
(Note 3)
Guard bar