Denso GT20Q-SB User Manual page 96

®
(5) Bluetooth Communications Parameters Specification
Settings
®
Bluetooth wireless communication
connection
Connecting device when master
Specify address of connecting device
Connection standby time when slave
Send/receive buffer clear for
wireless-disconnect
Operating state
PIN code
Security function
Local device ID
Auto-power off
Note 1: Factory settings: Set to "End operation"
(6) Data Transmission Format Specification (when SPP profile set)
Settings
Header
Terminator
BCC transmission
Note 2: When "No header" is set, BCC transmission is automatically disabled.
Parameters
Master mode
Slave mode
No change
Address
Local name
Address of connecting device
2 minutes
4 minutes
10 minutes
30 minutes
Enabled
Disabled
Start operation
End operation
One to eight alphanumeric characters
Disabled
Enabled
Other devices
Keyboard peripheral
Setting range 5-640 minutes
Disabled
Parameters
None
STX
User selection
None
ETX
CR
LF
CR LF
User selection
Transmission enabled
Transfer disabled
83
Default

Section 2.2

Section 2.2
Not specified
Section 2.2

Section 9.1


Section 2.1
(Note 1)
1234
Appendix 3


60 minutes
Section 3.2
: Only available via configuration software.
Default

Section 9.4 (1)

Section 9.4 (4)

(Note 2)
: Only available via configuration software.
Refer to
Refer to