Denso GT20Q-SB User Manual page 134

(2) Commands consist of the command field and the option fields
Command
S
D
Note 1: Settings can be saved to the FLASH ROM via the "PW" command.
Note 2: Configuration does not change if only the above command is sent.
■
Format of the command option field of the command S
S ,
minimum numbers of digits
Each option must delimit by a comma.
A comma is required even if an option is not set.
A comma is omissible if rest of the sub sequential options is not required to set.
Example
S
, , ,
Not omissible (Note 1)
Note 1: If the option fields are not set, code scanning instructed by the command will be disabled. Up to six commas can be
used.
Note 2: Configuration will not be changed if "S," is set.
Note 3: Insert two commas ",," in places between,
• "San code" and "Check digit" fields.
• "Check digit" and "minimum number of digits" field
Direction
Scanner Host
Scan codes
Check digits
1D code scanning configuration
2D code scanning configuration
Check digits
, ,
, maximum numbers of digits
, , ,
Omissible
121
Contents
, ,