Chapter 12 Settings Overview And Factory Settings - Denso GT20Q-SB User Manual

Chapter 12 Settings Overview and Factory Settings
The following parameters can be selected via the QR-coded parameter menu or configuration software (ScannerSetting_2D).
However, the parameters in the shaded boxes can only be set via the configuration software. At the time of shipping, all
settings are set to the factory defaults.
(1) Customizing Reading Mode Parameters
Settings
®
Bluetooth connection
Data verification mode
Data edit mode
Point scan mode
Double scan prevention time
(2) Customizing Communications Mode Parameters
Settings
Connected device
Profile
Easy connection setting
(Note 1)
Note 1: Only available via QR-coded parameter menu
Parameters
Wireless-disconnect scanning enabled
Wireless-disconnect scanning disabled
Regular scanning mode
n-point verification mode
2-point verification mode
Unedited
Data extraction mode
Data conversion mode
Block sorting mode
ADF script mode
Enabled
Disabled
Double scan enabled
Double scan prevention time
Set range 0.1 - 9.9 s
Parameters
BA series
Windows PC/Android
iPhone/iPad
SPP
HID
Windows PC (HID profile)
Android, Windows PC (SPP profile)
Android (HID profile)
iPhone, iPad (HID profile)
80
Default
Section 2.3


Section 7.1

Section 7.2
Section 7.4

Section 3.2
1 s
: Only available via configuration software.
Default

Section 2.2

Section 9.2,
Section 9.3
Section 2.2
: Only available via configuration software.
Refer to
Refer to