Denso GT20Q-SB User Manual page 102

Settings
EAN-8 code scanning
EAN-8 C/D transmission
EAN-8 EAN-13 conversion
UPC/EAN add-on 2-digit scanning
UPC/EAN add-on 5-digit scanning
UPC/EAN add-on only scanning
UPC/EAN add-on check level
Interleaved 2 of 5
Settings
Interleaved 2 of 5 scanning
Interleaved 2 of 5 minimum scannable
digits
Interleaved 2 of 5 maximum scannable
digits
Note 1: The parameter setting range and the number of scannable digits differ.
Parameters
Enabled
Disabled
Transmission enabled
Transfer disabled
Conversion enabled
Conversion disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled
Settings range - level 1-4
Parameters
Scanning enabled (without check
digit)
Scanning enabled (with check digit)
(check digit transmission enabled)
Scanning enabled (with check digit)
(check digit transmission disabled)
Disabled
2-99 digits
89
Default




Section 9.4 (7)



: Only available via configuration software.
Default

4 digits
(Note 1)
99 digits
: Only available via configuration software.
Refer to
Refer to