Line Provisioning And Configuration For Diva Server Pri Adapters - Eicon Networks Diva Server Series Installation Manual

Line Provisioning and Configuration
for Diva Server PRI Adapters
During the software installation, select the switch type as specified by your service
provider, e.g. Euro-ISDN (ETSI). This will set all line parameters to a default value
that is the most common value for the respective switch type.
In some countries the parameter value is different than the default. For the
Euro-ISDN (ETSI) switch type for example, the CRC 4 mode is normally on, so the
default will set the parameter CRC 4 Mode to ON. However, the CRC setting
needs to be OFF for Energis lines in the UK and Telecom Eireann lines in the
Republic of Ireland. Normally, lines in France, Belgium, and the Netherlands are
also provisioned with the CRC 4 mode OFF.
Please make sure that you configure the value as required by your service
provider. For detailed information see the Diva Server Configuration Manager
Online Help (DSMain.chm) for Windows operating systems and the Diva Server
for Linux Reference Guide for Linux.
Note: Your service provider will deactivate your line if you connect to it with wrong
settings. Always contact your service provider to ask for your line to be reactivated
before testing with new settings.

Line Provisioning and Configuration for Diva Server PRI Adapters

17
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030