General Safety Instructions - Eicon Networks Diva Server Series Installation Manual

General Safety Instructions

Use the following safety instructions to help ensure your own personal safety and
to help protect your computer, adapter, and working environment from potential
damage.
WARNING All Diva Server Adapters
All computers that have Diva Server adapters installed must comply
with the country specific safety regulations, such as CE or FCC, to
avoid serious personal injuries and damage to your computer, your
adapter, or both.
Before you install your Diva Server adapter or remove the cover
from your computer for any reason, disconnect the ISDN or analog
cable from the ISDN, analog network, E1, or T1 line, to avoid
personal injuries and damage to your computer, your adapter, or
both.
Proper installation of the adapter requires that it is screwed to the
metal backplate of the PC. This ensures proper grounding that is
necessary for your safety.
Diva Server ISDN
PRI and BRI signals can have telephone network voltages (TNV).
Therefore, ISDN BRI, PRI, E1, and T1 lines should be installed and
maintained by service personnel only. It may be hazardous if your
computer is not properly plugged in and grounded. This applies
particularly to users in North America and Australia.
Diva Server T1/PRI, PRI, V-2PRI, V-4PRI
Diva Server V-2PRI and V-4PRI, and all versions of Diva Server
T1/PRI and PRI 2.0 adapters may need approximately 20 Watts of
power.
If you have installed several adapters in your system, make sure
that the power supply will not be overloaded when you install your
Diva Server adapter, to avoid personal injuries and damage to your
computer, your adapter, or both.
Make also sure that your PC provides sufficient cooling to avoid
damage on your adapter.
14
VoIPon www.voipon.co.uk
General Safety Instructions
sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030