Serial Printer Connection - IDTECK LX505 User Manual

t one LX505 to TCP/IP network and then connect all the LX505 units using the RS485
multiple communication as shown in the diagram below.
3. Set a unique Communication Address for each LX505.
4. Install and run the LX505 Application Software.
4

Serial Printer Connection

A 9-pin connector (Serial communication connector, female) is needed to connect the LX50
5 with a serial printer via RS232 communication. Please follow the steps below.
1. Connect RS232-TX (Cyan wire with White stripe) to the pin #2 (RXD) of the 9-pin conn
ector.
2. Connect RS232-RX (Pink wire with White stripe) to the pin #3 (TX) of the 9-pin connect
or.
3. Connect GND, Black wire to the pin #5 of the 9-pin connector.
4. Plug in the 9-pin female connector to COM Port of the serial printer.
Serial Printer Connection p.27