The Name Display option is used to determine whether the unit will display the name of the
user who receives access. This setting also determines whether to print name when printing
events using serial printer.
User names can only be downloaded from the software. If you register a new user
via the device SETUP MENU, the name of the user can't be entered and, therefore,
won't be displayed when the user receives access.
If you set this option to USE, the maximum number of IDs that can be registered is
limited to 10,000. Also, you can set this option to USE only when there's no registe
red ID because the memory structure is different when the name display option is
applied.
4
F4 SETUP MENU
F4 SETUP MENU
p.51