※
iCON100/iCON100-SR QUICK INSTALLATION GUIDE
5.4.5 Optional Accessory Connections
Keypad and LCD Display Connection
Connect the Keypad and LCD Display to the Keypad and LCD ports as shown on below.
You should turn off the power when connecting.
Figure: Keypad and LCD Connection with iCON100
6. COMMUNICATION
6.1 RS232 Communication Port Connection
A 9-pin connector (Serial communication connector, female) is required to connect the iCON100 to a host
computer via RS232 communication. Please follow the instructions.
- Connect RS232-TX port of iCON100 to the pin #2(RX) of the 9-pin connector.
- Connect RS232-RX port of iCON100 to the pin #3(TX) of the 9-pin connector.
- Connect RS232-GND of iCON100 to the pin #5 of the 9-pin connector.
- Plug in the 9-pin connector to COM n Port of the host PC.
- Install and run iCON100 Application Software.
Figure: RS232 Communication
16