Serial Printer Connection - IDTECK LX007 Manual

2.4

Serial Printer Connection

A 9-pin connector (Serial communication connector, female) is needed to connect the LX00
7 with a serial printer via RS232 communication. Please follow the steps below.
1. Connect RS232-TX (Cyan wire with White stripe) to the pin #2 (RXD) of the 9-pin conn
ector.
2. Connect RS232-RX (Pink wire with White stripe) to the pin #3 (TX) of the 9-pin connect
or.
3. Connect GND, Black wire to the pin #5 of the 9-pin connector.
p.30 Communication