Product Explanation - IDTECK LX505 User Manual

Duress Alarm
In case of duress, enter the 2-digit Duress Password and press the <ENT> key before t
he normal access process. The door can be opened as usual, but the duress alarm is al
so generated at the same time. The duress alarm output will be sent to the TTL outpu
t and an alarm event will be sent to the host PC.
ARM / DISARM Function for Alarm Panel
While a device is in the ARM condition, its reader ports are all frozen and inputs to th
e ports are not processed so that no one can get access to the door. When this mode
is applied, the IDTECK LX505 / LX505SR sends signals to other connected security dev
ices so that they can function accordingly.
Two Men Operation
This feature is used to configure the IDTECK LX505 / LX505SR to allow a certain user
(e.g. a visitor) to pass the door only when that user is accompanied by another special
user (e.g. a guide). Both of the visitor and the guide should be authorized together fo
r access.
4 Level Individual Door Opening Time Setting
This feature is used only for setting four different door opening times.
Name Display
The IDTECK LX505 / LX505SR can display the user name when a user gains access.
Function Key Name Display
You can assign names for each function key via software. Using this feature, for exam
ple, you can give certain keys names like punch-in and punch-out and tell the employ
ees to press one of the function keys according to the nature of their access prior to e
ach access attempt. This way, you will be able to identify punch-in and punch-out eve
nts on the software.
2

Product Explanation

Product Explanation p.11