Communications; Rs232 Communication Port Connection; Rs-422 Communication Port Connection; Rs-422 Communication (Standalone) - IDTECK Star Finger007 User Manual

6. COMMUNICATIONS

6.1 RS232 COMMUNICATION PORT CONNECTION

A 9-pin connector (Serial communication connector, female) is required to connect the FINGER007 to a
host computer via RS232 communication Please follow the instructions.
- Connect RS232-TX port of FINGER007 to the pin 2 of the 9-pin connector.
- Connect RS232-RX port of FINGER007 to the pin 3 of the 9-pin connector.
- Connect RS232-GND of Finger007 to the pin 5 of the 9-pin connector.
- Plug in the 9-pin connector to COM1 or COM2 Port of the host PC.
- Install and run FINGER007 Application Software.

6.2 RS-422 COMMUNICATION PORT CONNECTION

6.2.1 RS-422 CONNECTION (STAND ALONE)
RS422/RS232 converter(CNP200) is required to use RS422 communication between the FINGER007
and a host computer. Please follow the instructions.
- Connect RS422-TX(+) of the FINGER007 to RS422-RX(+) port of the converter.
- Connect RS422-TX(-) of the FINGER007 to RS422-RX(-) port of the converter.
- Connect RS422-RX(+) of the FINGER007 to RS422-TX(+) port of the converter.
- Connect RS422-RX(-) of the FINGER007 to RS422-TX(-) port of the converter.
- Plug in the RS232 9pin connector of the converter to the COM1 or COM2 Port of the PC.
- Install and run FINGER007 Application Software.
20030516
Figure : READER CONNECTION
STAR FINGER007
17
User's Manual