Reader#2 Mode Time Schedule; Voice Time Schedule - IDTECK LX505 User Manual

For example, suppose you want to access the door by only presenting a card from 09:00 to
17:00 and use the ID + PW verification for the rest of the time. Then, you can do so by settin
g [R1 MODE SETTING] to ID+PW Mode, which is for the system operating mode, and then p
rogram T/S Code 01 so that it can include a Time Interval between 09:00 and 17:00. Then, h
ere, link the programmed Time Schedule Code 01 to the R1 MODE Time Schedule setting. T
o link a Time Schedule Code (01~10) to Reader#1 Mode, first, press <ENT> key and get into
the setting mode. Then, enter the 2-digit Time Schedule Code and press <ENT> key to store
and apply the Time Schedule Code to R1 MODE. To return to the previous menu, press <ESC
> key.
4.5

Reader#2 Mode Time Schedule

The READER#2 MODE TIME SCHEDULE setting can be configured in the same way as READ
ER#1 MODE T/S setting, which is explained in the previous section.
4.6

Voice Time Schedule

The Voice T/S feature allows you to apply time schedules to the voice message output. You
can configure the unit to play voice messages in a certain time range and mute them at othe
r times.
To apply a time schedule code, enter the time schedule code you want. Within the time ran
ge assigned by the time schedule, voice messages will be played while at other times, they w
ill not be played.
Using this feature, for example, you can configure the unit to play voice messages in the day
time and mute them at night.
p.54 Setting Changes