Duress Mode; Wiegand Output - IDTECK LX505 User Manual

Proximity / pin access controller

Hide thumbs Also See for LX505:

Table of Contents

2.6

Duress Mode

You can set Duress Mode for Reader#1. The default setting is NOT USE. If you select USE, th

e LCD will display the default Duress Password '00'. If you want to change the Duress Passw

ord, press <ENT> key and enter a 2-digit Duress Password. If you do not want to change it, p

ress the <ESC> key.

In case of duress, enter the 2-digit Duress Password and press <ENT> key prior to p

resenting the card. The Duress Alarm will be generated and reported to the host P

C while the door is opened as usual.

The Duress Password and ARM and DISARM codes must differ.

2.7

This feature allows you to use the LX505 as a reader (as opposed to as a controller). If this se

tting is set to USE, the LX505 sends 26bit Wiegand Output through two TTL output ports. (T

he LX505SR sends out 34bit Wiegand output.)

F2 SETUP MENU

p.45

Table of Contents

Lx505sr