Table of Contents
Advertisement
DRIVEABILITY - NGC
P0325-KNOCK SENSOR #1 CIRCUIT —
TEST
7
Turn the ignition off.
Replace the Knock Sensor.
Ignition on, engine not running.
With the DRBIII , erase DTC.
Attempt to operate the vehicle using the information noted in the Freeze Frame.
With the DRBIII , read DTC's.
Does the DRBIII display the DTC that was previously erased?
Yes → NOTE: Before continuing, check the PCM harness connector
No
ACTION
terminals for corrosion, damage, or terminal push out. Repair as
necessary. Replace and program the Powertrain Control Module
in accordance with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
→ Test Complete.
Continued
124
APPLICABILITY
All
Advertisement
Table of Contents
