Table of Contents
Advertisement
*PCI BUS COMMUNICATION FAILURE —
TEST
6
Turn the ignition off.
Disconnect the negative battery cable.
Using a ohmmeter, connect one end to the PCI Bus circuit at the DLC, and the other
end to ground.
While monitoring the ohmmeter, disconnect each module the vehicle is equipped with
one at a time.
NOTE: Total bus resistance to ground thru all of the modules is typically
between 350 to 1000 ohms. The more modules on the bus, the lower the total
bus resistance will be.
Is the resistance below 150.0 ohms with all the modules disconnected?
Yes → Repair the PCI Bus circuit for a short to ground.
→ Replace the module that when disconnected the short to ground
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
was eliminated.
Perform BODY VERIFICATION TEST - VER 1.
Continued
29
COMMUNICATION
APPLICABILITY
All
Advertisement
Table of Contents
