Table of Contents
Advertisement
CS
SEAT BELT & RETRACTOR (Continued)
Fig. 41 SEAT BELT & RETRACTOR - 3RD ROW - UPPER - REMOVE/INSTALL
1 - UPPER QUARTER PANEL
2 - HEAD IMPACT COUNTER MEARURE RAIL - REAR
3 - UPPER LIFTGATE OPENING
4 - CURTAIN AIRBAG
5 - HEAD IMPACT COUNTER MEASURE D-PILLAR
(2) Install the turning loop retaining bolt into the
C-pillar (Fig. 39). Torque bolt to 40 N·m (30 ft. lbs.)
and install seat belt turning loop cover.
(3) Install the two seat belt retractor mounting
bolts (Fig. 39). Torque bolts to 40 N·m (30 ft. lbs.).
(4) Install the lower quarter trim panel (Refer to
23 - BODY/INTERIOR/QUARTER TRIM PANEL -
INSTALLATION).
(5) Install the second and third row lower seat belt
anchor bolts (Fig. 39) and (Fig. 40). Torque bolts to
40 N·m (30 ft. lbs.) and then install lower anchor bolt
covers.
(6) Install the second and third row seats into
vehicle on the side that the seat belt and retractor
are being serviced.
(7) Connect the battery negative cable.
(8) Verify vehicle and system operation.
(9) Close hood.
SEAT BELT AND RETRACTOR - THIRD ROW
(1) Position seat belt and retractor in vehicle.
6 - TURNING LOOP BOLT
7 - D-PILLAR
8 - TURNING LOOP AND SEAT BELT WEBBING
9 - UPPER D-PILLAR TRIM PANEL
10 - TURNING LOOP COVER
(2) Install the turning loop retaining bolt in the
D-pillar (Fig. 41). Torque bolt to 40 N·m (30 ft. lbs.)
and install seat belt turning loop cover.
(3) Install the two seat belt retractor mounting
bolts (Fig. 38). Torque bolts to 40 N·m (30 ft. lbs.).
(4) Install the B-pillar seat belt retaining ring onto
the seat belt webbing and then the retaining ring
screws to the D-pillar (Fig. 40).
(5) Install the upper D-pillar trim (Refer to 23 -
BODY/INTERIOR/D-PILLAR TRIM - INSTALLA-
TION).
(6) Install the lower quarter trim panel (Refer to
23 - BODY/INTERIOR/QUARTER TRIM PANEL -
INSTALLATION).
(7) Install the second and third row lower seat belt
anchor bolts and covers to the lower quarter trim
panel at the C (Fig. 39) and D-pillars (Fig. 40).
(8) Install the second and third row seats to the
side of vehicle that the seat belt and retractor are
being serviced.
(9) Connect the battery negative cable.
RESTRAINTS 8O - 33
Advertisement
Table of Contents
