Installation; Installation Overview - Honeywell HercuLine 10260S Installation, Operation And Maintenance Manual

Installation Overview

The procedures to install the 10260S actuator and place it in service require that you:
•
Select a suitable location for installation. (See Installation Considerations below.)
•
Mount the actuator securely.
•
Install mechanical connections or linkage between control arm and final control element. Use HAL
software application to aid in mechanical installation.
•
Make all electrical connections for actuator according to local and national electrical codes.
•
Power up actuator.
•
Enter, verify and adjust set up parameters for proper operation.
•
Adjust control arm linkage for accurate operation of final control element.
This section provides you with mechanical and electrical installation information required to mount and
connect the 10260S Smart Actuator to your specific application. Unpacking instructions, installation
consisderations, electrical and safety precautions also included in this section should be observed.
Revision 5 10260S HercuLine® Actuator Installation, Operation and Maintenance Manual
7/07

3. Installation

3. Installation - Installation Overview
13